Adding an AI product to Mobius

To add your AI product to the Mobius app please follow the steps below to perform a reset:

AI lights: (16,32,64)
1. On your AI Light(s), press and hold the reset button on the underside
2. Unplug the light from power while still holding the button
3. Plug the light back into power while continuing to hold the button
4. Count to three seconds then release the reset button
5. Complete steps 1 - 4 for each AI Light being added to Mobius

Nero/Axis/Orbit 
1. Unplug the Nero from power.
2. Once unplugged, Push and Hold the button on the controller.
3. While holding the button, plug the Nero into power.
4. Continue to hold the button until the unit flashes RED.
5. As soon as you see flashing RED, please let go.

After the device has been reset you can now open the Mobius app (after it has been downloaded). Select the "+" in the top right corner, then select Create New Tank. You can name the tank whatever you'd like, then select "Next" in the top right corner.  Your device should show up in the list. Select the device you want to add, then select "Next" in the top right corner.  It may perform an update. From there you can add a passcode if you would like but it is not necessary. If you do not want to add a passcode select "Don't add passcode". You can now choose a schedule from the Device Setup page. Once you find a schedule you like you can tap on it and select "Activate"